Hanna Instruments HI 98188 Instruction Manual page 23

Wait until the reading is stable (about 5 minutes).
Note: If the input record has an instability higher than 1mS, stability period
will be reset. The completion time bar will remain empty.
The "USP Met" message will be displayed if the USP stage 2 criteria is reached.
Press Report to view the USP report.
Press key to scroll the report screens.
Press Log to memorise report.
Notes:• The record number will be the same as at the Stage 1 report
(informations of the same analyse).
• If the log space is full enter view logged data mode by pressing
RCL key and free log space by deleting previously memorized records.
The "USP Not Met" message is displayed if the USP stage 2 criteria is not met.
Press Report to view report.
Press key to scroll the report screens. Press Log to memorise report.
Press Stage 3 to enter in stage 3 water analyze.
The USP Stage 3 tutorial is displayed.
23