ZyXEL Communications ZYAIR B-2000 Quick Installation Manual page 26

ZyAIR B-2000 Wireless LAN Gateway with 4-Port Switch
1. Click Start and then Run. In the Run window, type "winipcfg" and then click OK to open the IP
Configuration window.
2. Select your network adapter. You should see your computer's IP address, subnet mask and default
gateway.
Set ting up Yo ur W ind ow s NT /20 00 /XP Comp ute r
Configuring TCP/IP
1. Click Start, Settings, Network and Dial-up Connections and right-click Local Area Connection or
the connection you want to configure and click Properties. For Windows XP, click start, Control
Panel, Network and Internet Connections and then Network Connections. Right-click the network
connection you want to configure and then click Properties.
2. Select Internet Protocol (TCP/IP) (under the General tab in Win XP) and click Properties.
3. The Internet Protocol TCP/IP Properties window opens. Click Obtain an IP address
automatically.
4. Click Obtain DNS server automatically.
5. Click Advanced, IP Settings tab and remove any installed gateways, then click OK.
6. Click OK to save and close the Internet Protocol (TCP/IP) Properties window.
7. Click OK to close the Local Area Connection Properties window.
8. Turn on your ZyAIR and restart your computer (if prompted).
Verifying TCP/IP Properties
1. Click Start, Programs, Accessories and then Command Prompt.
2. In the Command Prompt window, type "ipconfig" and then press ENTER. The window displays
information about your IP address, subnet mask and default gateway.
Configuring TCP/IP Properties
1. Click the Apple menu, Control Panel and double-click TCP/IP to open the TCP/IP Control Panel.
2. Select Ethernet from the Connect via list.
3. Select Using DHCP Server from the Configure list.
4. Close the TCP/IP Control Panel.
5. Click Save if prompted, to save changes to your configuration.
6. Turn on your ZyAIR and restart your computer (if prompted).
26
Set ting up Yo ur Mac in tos h Co mp ute r