Chapter 2 Preparation For Installation; Installation Precautions; Installation Environment Requirements; Equipment Accessories - YUNKE CHINA DCWL-7962OT Installation Manual

DCWL-7962OT Outdoor AP
Installation Manual

Chapter 2 Preparation for Installation

2.1 Installation Precautions

Only allow the professionals installing and disassembling the device and its annex.
Before the installation and configuration, please read the related security introduction
carefully.

Adopt the appropriate security measures to avoid the personal injury and
equipment damage.

Please put the device on the dry and flat place and ensure the anti-skid
measures.

Keep the device clean without dirt.

Do not put the device and the installation tools in the walking area.

2.2 Installation Environment Requirements

Before the installation, please check the installation conditions of the device to make
sure that the device is in the good operating environment in a long time. Check this with
the following aspects.
The temperature and humidity environment requirements of the device are as below:
Standard working environment temperature (outdoor)
Storage temperature
Working humidity (non-condensing)

2.3 Equipment Accessories

Please refer to the packing list.
Table 2-1 The temperature and humidity index
Items
2-1
Chapter 2 Preparation for Installation
-40℃～60℃
-45℃～70℃
5%～95%
Range