Connect Ground Cables; Connect Rf Cables - YUNKE CHINA DCWL-7962OT Installation Manual

DCWL-7962OT Outdoor AP
Installation Manual

3.5.2 Connect Ground Cables

Please install the ground cables onto the ground point.

3.5.3 Connect RF Cables

Please install the RF cables or antenna onto the RF interface. The cables interface
cannot be installed with a mistake. The 5G cable should be connected in the 5G RF
interface and the 2.4G cable should be connected in the 2.4G RF interface. After
connection, wrap 3 layers of waterproof tape on the connection point. The waterproof tape
should be elongated first to make its width turn into the half of the original width; and then
wrap it.
Fig 3-9 Install the waterproof kit
Fig 3-10 Install the antenna
3-7
Chapter 3 AP Installation