Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Salus EP310
Summary of Contents for Salus EP310
- Page 1 Model: EP310 Three channel programmable controller Installation Manual...
-
Page 2: Table Of Contents
Box content ........................3 Introduction ........................4 Features ..........................4 Installation ........................5 Button functions and LCD icons ..............7 Operations ........................8 Functions ........................14 Factory Reset ........................ 16 Technical Info ....................... 17 Warranty .......................... 18 02 EP310 Installation Manual... -
Page 3: Product Compliance
Always isolate the AC Mains supply before installing or working on any components that require 230 VAC 50Hz supply. Box content The box includes the EP310 controller, 2X screws and plugs and the Installer Manual-Quick Guide. EP310 Controller 2x screws and plugs... -
Page 4: Introduction
By using the EP310 controller you can manage the commands sent to your boiler, motorized valves used in your system or to your thermostat. You can set the EP310 programmable controller to a 12 or 24 hour format, the Daylight saving Time (DST) being automatically enabled. The program mode is also selectable between a 5-2 (Monday-Friday and Saturday-Sunday) or 24 hour format. -
Page 5: Features
N L 1 2 3 4 5 6 Central Heating Off Hot Water On Central Heating 1 On Central Heating 2 On Central Heating 2 Off Earth Parking (no electrical connection) (off) (off) (on) (on) (on) (off) EP310 Installation Manual... - Page 6 Note: Changes to the jumper settings should only be made by the engineer carrying out the installation or another qualified person. The installer should select the jumper positions required if changes need to be made to the factory default settings. These jumpers are found on the rear of the controller. 06 EP310 Installation Manual...
-
Page 7: Button Functions And Lcd Icons
Days of the week Holiday Mode Clock DST On/Off Heating zone 1 On Program number Heating zone 2 On Mode Indicator Hot water On Hot Water panel Boost hours Heating Zone 2 panel AM/PM Heating Zone 1 panel EP310 Installation Manual... -
Page 8: Operations
Status after Reset Operation Mode Normal mode Clock 12:00 AM AM/PM indicator Date January 1, 2016 Daylight Saving Time(DST) Program Factory default 5+2 Program Number indicator SET indicator PROG indicator Mode indicator(s) “Off“ Output Relay CH/HW indicator(s) 08 EP310 Installation Manual... - Page 9 Press Select to confirm. to set the year. MODE MODE MODE MODE MODE MODE MODE MODE MODE SELECT SELECT SELECT Press Up or Down Press Select to confirm. Press Up or Down to set the month. to set the date. EP310 Installation Manual...
- Page 10 Operating Modes EP310 can operate in 5 different modes, applicable to CH1, CH2, HW or CH+HW. The operations modes are the same for CH and HW and can be set individually, or together. If you want to choose the mode for the CH1(central heating in zone 1), press the 1 Mode key.
- Page 11 3 sec 3 sec Press for CH1. Press for CH2. Press for HW. Pressing the Mode key 3 times activates the AUTO. In AUTO mode, the controller gives the boiler the ON/OFF command depending on your schedule. EP310 Installation Manual...
- Page 12 10:30 the relay will be ON from 10:00, OFF from 10:30 (ADV) to 14:00 if no +1Hr Override. During ADV, if at 10:45 +1Hr (Boost) is pressed relay ON again at 10:45 (boost starts), OFF at 11:45 (Boost ends) until ends at 14:00, then ON again at 14:00. 10 EP310 Installation Manual...
- Page 13 Total: 63 settings/week EP310 is a 3 channel controller, that gives the possibility to control both Central Heating in 2 different zones and Hot Water. You can choose which one you would like to control, by simply pressing the 1...
- Page 14 All 3 icons will appear. Press Select setting programs. will start flashing. Press up to start entering a start time for the arrow 3 times. program and then follow the same steps as above from 3-11. 14 EP310 Installation Manual...
- Page 15 Press Select. Use up/down arrows Press Select. to select minutes. MODE MODE MODE MODE MODE MODE MODE MODE MODE SELECT SELECT SELECT Use up/down arrows Select an end time for Press Select. the first program. to select minutes. EP310 Installation Manual...
- Page 16 3 times. follow the same steps as above from 3-11 Note: To save your settings and exit to home screen in normal mode, press Set at any time. 16 EP310 Installation Manual...
-
Page 17: Functions
MODE MODE MODE MODE MODE SELECT SELECT SELECT Press +1Hr to enter Boost The number of boost hours for To exit boost override, press override for CH2. CH2 will be displayed. mode button until number +x disappears. EP310 Installation Manual... - Page 18 MODE MODE MODE MODE 3 sec MODE SELECT SELECT Long press Mode while in Short press Mode while in Auto or Once to enter ADV to exit mode back ADV override Mode. to auto or Once. 18 EP310 Installation Manual...
- Page 19 Press for 3 seconds Controller in current mode LCD Backlight If AC is powered, LCD backlight is activated when or any key is pressed. The backlight will be turned off in 15 seconds after all keys are released. EP310 Installation Manual...
-
Page 20: Factory Reset
MODE MODE MODE MODE MODE MODE SELECT SELECT Press reset button. LCD will turn OFF. MODE MODE MODE MODE MODE MODE SELECT SELECT All icons will be displayed. Software version. MODE MODE MODE SELECT Normal Mode. 20 EP310 Installation Manual... -
Page 21: Technical Info
Yes, max 9 hours(selectable by software) Holiday Override Yes, max 31 days (selectable by software) Clock Clock Format 12 or 24 hour (selectable by software) Clock Accuracy +/-1 min/month Daylight Saving Time (DST) Yes, Clock automatically adjusted if DST is enabled. EP310 Installation Manual... -
Page 22: Warranty
Warranty SALUS Controls warrants that this product will be free from any defect in materials or workmanship, and shall perform in accordance with its specification, for a period of two years from the date of installation. SALUS Controls sole liability for breach of this warranty will be (at its option) to repair or replace the defective product. - Page 23 SALUS Controls is a member of the Computime Group Maintaining a policy of continuous product development, SALUS Controls plc reserves the right to change specification, design and materials of products listed in this brochure without prior notice. For the latest PFD Instruction Manual, go to www.salus-manuals.com...