Electrical Connection; Getting To Know Your Appliance - Siemens KD46NVI20N Instructions For Use Manual

Electrical connection

The socket must be near the appliance
and also freely accessible following
installation of the appliance.
The appliance complies with the
protection class I. Connect the appliance
to 220–240 V/50 Hz alternating current
via a correctly installed socket with
protective conductor. The socket must
be fused with a 10 to 16 A fuse.
For appliances operated in non-
European countries, check whether the
stated voltage and current type match
the values of your mains supply. This
information can be found on the rating
plate. Fig. '
m
Warning
Never connect the appliance
to electronic energy saver plugs.
Our appliances can be used with mains
and sine-controlled inverters. Mains-
controlled inverters are used
for photovoltaic systems which
are connected directly to the national
grid. Sine-controlled inverters must be
used for isolated applications (e.g. on
ships or in mountain lodges) which are
not connected directly to the national
grid.
Getting to know your
appliance
Please fold out the illustrated last page.
These operating instructions refer
to several models.
The features of the models may vary.
The diagrams may differ.
Fig. !
* Not all models.
1-4 Controls
5 Temperature controller
6 Fast freezer compartment*
7 Ice maker *
8 Ice cube container*
9 Light switch
10 Extendable glass shelf
11 Air outlet opening
12 Light (LED)
13 Shelf in the refrigerator
compartment
14 Bottle shelf *
15 Cold storage compartment
16 Vegetable container
17 Height-adjustable feet
18 Egg rack
19 Door shelf
20 Shelf for large bottles
A Freezer compartment
B Refrigerator compartment
en
9