Checking the Size of the Memory Installed
IMPORTANT
• If memory is not installed correctly, the message "Extended memory error" appears or nothing
is displayed on the screen when you turn on the computer. In such a case, turn off the MAIN
switch of your computer and reinstall the memory.
1. Turn on the computer.
2. Click the Start button and select Control Panel.
The Control Panel window appears.
3. If the
(System) icon is not found in the Control Panel window, click "View all Control
Panel options."
4. Click the
The System Properties dialog box appears.
5. Make sure that the circled numerical value in the figure below has increased by the
size of the memory you added.
The figure shows an example of the expansion of 64 MB of memory.
Depending on the system configuration, the memory size displayed may be 1 MB smaller
than the actual memory size.
6. Click OK.
The Control Panel window appears again.
Critical Point
If the memory size displayed is incorrect, check whether the memory is installed properly.
74
(System) icon.
Memory size