Fujitsu LifeBook C-7651 Manual page 61

Resume (Restoring suspended operation)
There are two ways to resume operation.
Using the SUS/RES switch
Use this method if you placed the computer into hibernation mode, using the Shut Down Windows
dialog box or the SUS/RES switch.
1. Simply press the SUS/RES switch.
A window appears on the screen, showing the progress of the reloading of the saved data from
the hard disk. After a while, the system will resume at the same point as when you suspended
operation.
Status indicator LCD
(The illustration varies depending on the model and use conditions.)
Critical Point
If pressing the SUS/RES switch does not cause the computer to resume operation, it is
probable that the MAIN switch is turned off. If so, turn it on. This displays a window showing
the progress of the reloading of the saved data from the hard disk, and after a while, the
system will resume at the same point as when you suspended operation.
Opening the LCD display
Use this method if you placed the computer into hibernation mode by closing the LCD display.
1. Open the LCD display.
Unlock the LCD display by sliding the latch on the front panel to the right and lift the display while
holding the computer with a hand.
A window appears on the screen, showing the progress of the reloading of the saved data from
the hard disk. After a while, the system will resume at the same point as when you suspended
operation.
Latch
Status indicator LCD
(The illustration varies depending on the model and use conditions.)
SUS/RES switch
LCD display
43