Sony NWZ-A826 Operation Manual page 232

"VPT(Surround)"
setting or "Clear Stereo"
function is not effective.
Cannot see the video,
but can hear it.
Buttons do not work.
Playback does not
stop.
The player does not
work.
Transferred data
cannot be found.
The volume is not
loud enough.
There is no sound
from the right channel
of the headphones.
Or the right channel
sound is heard from both
sides of the headphones.
Playback has stopped
suddenly.
Thumbnails are not
displayed.
Cover art is not
displayed.
The player cannot
format.
• When outputting to external audio speakers using the optional cradle, "VPT(Surround)"
settings and the "Clear Stereo" function may not
be
effective because the player is
designed for compatible headphones only. This is not a malfunction.
• If you have not applied the sound effects in "Sound Effect Preset:'
"VPT(Surround)" does not work during Bluetooth communication (@' page 92).
• The file is a .3gp file. (.3gp only supports audio.)
• The video file is not in a video folder.
~
Place the video files in a video folder by dragging and dropping.
• The HOLD switch is set to the HOLD position.
~
Slide the HOLD switch to the opposite position (@' page 11).
• The player contains moisture condensation.
~
Wait a few hours to let the player dry.
• The remaining battery power is low or insufficient.
~
Charge the battery by connecting the player to a running computer (@' page 114).
~
If you charge the battery and nothing changes, press the RESET button to
reset the player (@' page 124).
• While "Connecting" is being displayed, you cannot operate the player.
~
Disconnect the USB connection, then operate the player.
• With this player, there is no difference between stopping and pausing. When you
press the HI button," appears and playback pauses/stops.
• The remaining battery power is insufficient.
~
Charge the battery by connecting the player to a running computer (@' page 114).
~
If you charge the battery and nothing changes, press the RESET button to
reset the player (@,page 124).
• The built-in flash memory of the player was formatted using Windows Explorer.
~
Format the built-in flash memory on the player (@' page 110).
• The supplied USB cable was disconnected from the player while data was being
transferred.
~
Transfer usable files back to your computer and format the built-in flash
memory on the player (@' page 110).
• After dragging and dropping in Windows Explorer, data hierarchy levels do not
correspond to the player (@' page 116).
• Transferred files are not in a playable format. For details, see "Supported file
format" of "Specifications" (@,page 154).
~
Convert the ATRAC audio data using the supplied MP3 Conversion Tool.
~
Songs or videos may not be played back, depending on the file format (@' page 154).
~
Photos may not be displayed, depending on the file size or the file format
(@'
page 154).
• "AVLS (Volume Limit)" is enabled.
~
Disable
'~VLS
(Volume Limit)" (@' page 99).
• The headphone jack is not fully inserted.
~
If the headphones are not connected correctly, sound will not be output
properly. Insert the connecting pin of the headphones into the jack until it
clicks (@' page 10).
• The remaining battery power is insufficient.
~
Charge the battery by connecting the player to a running computer (@' page 114).
• The songs or video files that cannot be played are played.
~
Play back the other song or video files.
• Songs do not have cover art information whose file format is supported by the player.
Thumbnails are displayed only when songs have cover art information whose file
format is supported by the player.
~
Transfer again using the supplied Windows Media player, or another transfer
capable software.
• Thumbnail name does not match its video file, or the video file is not in the
correct location.
~
Place a JPEG file of the same name as the video file into the folder under the
"VIDEO" folder.
• If the photos do not have thumbnails that are complied with Exif file format, the
thumbnails cannot be displayed.
~
Retransfer the photos using supplied Media Manager for WALKMAN.
• Cover art information is not included with the data.
~
The cover art only appears if the cover art information is included.
You can set cover art using the supplied Windows Media Player 11, or another
transfer capable software for setting cover art. For details on operation, refer
to the Help or maker of the software.
• Some cover art is not displayed, depending on its file format.
• The remaining battery is low or insufficient.
~
Charge the battery by connecting the player to a running computer (@' page 114).