Remote Status And Control - Motorola MVME167P Installation And Use Manual

Remote Status and Control

The remote status and control connector, J3, is a 20-pin connector located
behind the front panel of the MVME167P. It provides system designers
with flexibility in accessing critical indicator and reset functions.
When the board is enclosed in a chassis and the front panel is not visible,
this connector allows the Reset, Abort, and LED functions to be extended
to the control panel of the system, where they are visible. Alternatively,
this allows a system designer to construct a RESET/ABORT/LED panel
that can be located remotely from the MVME167P.
http://www.motorola.com/computer/literature
Connectors
5
5-13