1Hardware Preparation and
Introduction
This chapter describes the equipment you need and the tasks you will
perform to set up the MVME167P Single Board Computer.
Equipment Required
To complete an MVME167P-based system, you need the following
equipment:
Figure 1-1
major components.
VME system enclosure with power supply and system backplane
Display console
Operating system (and / or application software)
Disk drives (and / or other I/O) and controllers
MVME712 series transition module, connecting cables and P2 or
LCP2 adapter
illustrates the MVME167P Single Board Computer with its
Installation
1
1-1