LG 32LV340C Easy Setup Manual page 35

* Digital Antenna/Satellite
Data 00 : xx (Don't care)
[Data 01][Data 02]: Major Channel Number
Data 01 : High byte Channel Data
Data 02 : Low byte Channel Data
- 00 01 ~ 27 0F (Decimal: 1 ~ 9999)
[Data 03] : Minor/Branch Channel Number
[Data 04] (Don't care in Satellite)
Data 03 : High byte Channel Data
Data 04 : Low byte Channel Data
Data 05 : Input Source (Digital/Satellite for
Japan)
- 02: Antenna TV (DTV)
- 07: BS (Broadcasting Satellite)
- 08: CS1 (Communication
Satellite 1)
- 09: CS2 (Communication
Satellite 2)
* Tune Command Examples:
1 Tune to the digital antenna (ISDB-T) channel
17-1.
Set ID = All = 00
Data 00 = Don't know Physical = 00
Data 01 & 02 = Major is 17 = 00 11
Data 03 & 04 = Minor/Branch is 1 = 00 01
Data 05 = Digital Antenna TV = 02
Total = ma 00 00 00 11 00 01 02
2 Tune to the BS (ISDB-BS) channel 30.
Set ID = All = 00
Data 00 = Don't know Physical = 00
Data 01 & 02 = Major is 30 = 00 1E
Data 03 & 04 = Don't Care = 00 00
Data 05 = Digital BS TV = 07
Total = ma 00 00 00 1E 00 00 07
* This feature is varied based on the model.
Ack [a][ ][Set ID][ ][OK][Data 00][Data 01]
[Data 02][Data 03][Data 04][Data 05]
[x][a][ ][Set ID][ ][NG][Data 00][x]
21. Channel(Programme) Add/Del(Skip)
(Command: m b)
• To skip current channel(programme) for next
time.
Transmission [m][b][ ][Set ID][ ][Data][Cr]
Data 00: Del(ATSC,ISDB)/Skip(DVB)
Ack [b][ ][Set ID][ ][OK/NG][Data][x]
- Set the saved channel status to del(ATSC, ISDB)/
skip(DVB) or add.
22. Key (Command: m c)
• To send IR remote key code.
Transmission [m][c][ ][Set ID][ ][Data][Cr]
Data Key code - page 18.
Ack [c][ ][Set ID][ ][OK/NG][Data][x]
23. Control Backlight, Control Panel Light
(Command: m g)
* For LCD TV / LED TV
• To control the backlight.
Transmission [m][g][ ][Set ID][ ][Data][Cr]
Data Min: 00 to Max: 64
Ack [g][ ][Set ID][ ][OK/NG][Data][x]
* For Plasma TV
• To control the panel light.
Transmission [m][g][ ][Set ID][ ][Data][Cr]
Data Min: 00 to Max: 64
Ack [g][ ][Set ID][ ][OK/NG][Data][x]
24. Input select (Command: x b)
(Main Picture Input)
• To select input source for main picture.
Transmission [x][b][ ][Set ID][ ][Data][Cr]
Data 00: DTV
Ack [b][ ][Set ID][ ][OK/NG][Data][x]
* This function depends on model and signal.
01: Add
01:
02: Satellite DTV 10:
ISDB-BS (Japan)
03: ISDB-CS1 (Japan)
04: ISDB-CS2 (Japan)
11: CATV
20: AV or AV1 21:
40: Component1 41:
60: RGB
90: HDMI1 91:
92: HDMI3 93:
CADTV
ATV
AV2
Component2
HDMI2
HDMI4
27