Slider Complete Assembly - Sony MDS-PC1 Service Manual

3-6. SLIDER COMPLETE ASSEMBLY

4 Remove the slider complete assembly
in the direction of arrow with putting
out of two claws.
• Note for installation of Slider complete assembly
OK
NG
Take care not to damage the
detective switch.
claw
1 Screw
3 Set the shaft of Gear (LA) to be at the
position in the figure.
claw
(M1.7x2)
Slider complete assembly
Install the part A of lever (head up)
to pass over the slider complete assembly.
– 33 –
45˚
2 Retainer (gear)
Part A