I/O Modules - Siemens SINUMERIK 810D Configuration Manual

03.02
12.95
Interconnecting
The following interconnecting cables are used for the SINUMERIK 810D
cables
Table 1-3 Interconnecting cables for the SINUMERIK 810D
No. Order No.
1 6FX2 002-4EA0V-1VV0
2 6ES7 901-0BF00-0AA0
3 6FX2 002-4AA21-1VV0
4 Included in the scope of sup-
ply for the PG740
5 6FX2 002-4AA41-1AB0
6 6FX2 002-4AA21-1VV0
7 6FX2 002-1CB01-1AB0
8 6ES7 368-3VVV0-0AA0
9 6FC5 411-0AA80-0AA0
10 6FC5 412-0FA80-0AA0
11 6FX2003-0DA00-0AA0
1)
12
2)
13
14
6FX2002-2CG00-1AA0
6FX2002-2CH00-1AA0
2)
15
16 6FX2-002-1AAV3-1VVV
2)
17
Each cable is assigned its own number.
You can find these numbers (1 to17) in the previous diagrams.
1)
For the length code, see References: /Z/ Catalog NC Z
see Reference:
2)
PCU 50/70, MCP
There are four possible versions:
and HHU/HT6
S
S
S
S
E Siemens AG, 2002. All rights reserved
SINUMERIK 810D Manual Hardware Configuration (PHC) - - 11.02 Edition
1)
MPI bus cable from operator panel front to MCP and CCU
MPI bus cable from distributor box (HHU) to CCU
1)
Interconnecting cable from distributor box to cable distributor on CCU
(for handwheel pulses from HHU)
MPI bus cable to the PG
Probe connecting lead to cable distributor, length: 5m
1)
Connecting cable for electronic handwheel to cable distributor on CCU
Drive bus cable (1m) to the NCU terminal block connector
1)
Connecting lead for Step7-300 I/Os (IM361 or single I/O module)
Shielded interconnecting cable for single- -tier installation with several
single I/O modules
Cable set for external SIMODRIVE 611 closed-loop control, for
connecting device bus and drive bus
Terminator, drive bus (only when using a drive bus)
Ribbon cable to terminal strip converter
Motor encoder cable - - incremental
Cable for connecting direct measuring systems to CCU
Power leads for the motor
Round cable from HT6 to distributor box
Round cable from HHU to distributor box
/PJ2/SIMODRIVE Configuration
HHU/HT6 without PCU50/70/MCP
PCU 50/70/20 + MCP
PCU 50/70/20
MCP
1 System Overview
1.2 System configuration
Designation
- - absolute
- - incremental
- - absolute
MPI bus cable with cable no. 1
MPI bus cable with cable no. 2
MPI bus cable with cable no. 2
1-19