Factory Setting; How To Turn On The Factory Settings; What Is The Factory Settings - Panasonic AG-AC7P Service Manual

5. Factory Setting

5-1. How To Turn On The Factory Settings?

1. Set the mode switch "Motion Picture Recording" mode.
2. Turn the power on, and then while keep pressing the "Zoom lever" to W side, "Focus" switch and "Menu" button
for more than3 seconds until the top screen of the Service Mode Menu being displayed.
3. Touch the [ 1 ] of LCD.
4. Touch the [ YES ] of LCD.
5. After few seconds "END" is displayed on LCD monitor. Cutting of battery connection or AC power supply
connection as a completion of the "FACTORY SETTINGS".

5-2. What Is The Factory Settings?

The factory settings clean up and/or refresh the following settings.
1. MENU, MODE, ADJUSTMENT VALUE.
2. SD card format.
3. Reset the folder number and file number of still pictures.
(Setting the folder number is 100, and file number is 0.)
4. Clear the mechanism lock information.
5. Clear the service mode information contents.
6. Initialize the VIERA Link Physical Address.
The setting position of factory settings:
INF-11