Panasonic SA-PM38DBEB Service Manual page 38

• Assembly of Power Amp IC (IC5101)
Step 3 : Remove Power Amp IC (IC5101).
Step 1 : Apply grease to the heatsink unit.
Step 2 : Install Power Amp IC onto Power P.C.B..
Caution : Ensure the pins are inserted & seated properly
on the Power P.C.B..
Step 3 : Fix the Power Amp IC (IC5101) onto the heatsink unit
with 2 screws.
Step 4 : Solder pins of the Power Amp IC (IC5101) on the sol-
der side of Power P.C.B..
Caution : Check for solderability of the Power Amp IC.
38