PROGRAMMING SCRAMBLE
The scramble feature makes your transmissions
sound garbled to anyone listening without the same
scramble code. It does not guarantee confidentiality,
but it adds an extra layer of privacy. Scramble mode is
by default set to 'OFF'.
Once you have entered Advanced Configuration
Mode and selected the channel in which you want to
enable Scramble, scroll up or down through the
programming modes by short pressing the PTT button
or (Menu) button until the radio reaches the Scramble
Programming Mode.
The radio display shows the Scramble settings as
follows:
The current scramble value blinks. You can select the
desired scramble value (0,1,2 or 3) by pressing the
and buttons. Long press the PTT button to exit and
save, or short press the PTT button to move to the
next programming feature without saving.
38
English
Note:
The values available for scrambling are
dependent to the values programmed viathe
CPS. Scramble is disabled when the value
is set to '0'.
PROGRAMMING MAXIMUM NUMBER OF
CHANNELS
You can configure the maximum number of channels
for the radio. Once you have entered the Advanced
Configuration Mode, scroll up or down through the
programming modes by short pressing the PTT button
or (Menu) button until you reach the 'Maximum
Channel Programming Mode'.
The radio display shows the Maximum Number of
Channels as follows:
MA
CH
X
The radio display blinks the current maximum number
of channels programmed. Use the Programmable
Button A and Programmable Button B buttons until
you get the desired maximum number of channels.
Long press the PTT button to exit and save, or short