Motorola RDU4160d User Manual page 28

Charging a Radio and Battery using
a Multi Unit-Charger - MUC (Optional
Accessory)
The Multi-Unit Charger (MUC) allows drop-in
charging of up to six radios or batteries.
Batteries can be charged with the radios or
removed and placed in the MUC separately.
Each of the six charging pockets can hold a
radio (with or without the Holster) or battery, but
not both.
1. Place the Multi-Unit Charger on a flat surface.
2. Insert the power cord plug into the MUC's dual
pin connector .
3. Plug the power cord into an AC outlet.
4. Turn the radio OFF.
5. Set removable bracket for battery type
26
English
6. Insert the radio or battery into the charging
pocket with the radio.
Note:
• This Multi-Unit Charger clones up to three radios
(three Source radios and three Target radios).
Refer to "Cloning with a Multi Unit Charger
(MUC)" on page 53 for more information.
• More information on the Multi-Unit Charger's
operation is available in the Instruction Sheets
provided with the MUC. For more information on
the parts and their part numbers, refer to Chapter
"Accessories" on page 75.