Table of Contents
Advertisement
Picture Brightness
level. L (low) makes the picture darker. H (high) makes the picture brighter.
Phase Adjustment
phase difference between cameras. Make sure Switch 4 is ON to activate
the Line lock function (AC operation only).
DIP Switches
Set the DIP switches (#3) to activate or deactivate the
following functions:
Switch Function
BLC (Backlight Compensation). Set to ON to have the
1
camera adjust the exposure to compensate for situations
where the subject is lit from behind. The factory default setting
is OFF.
AGC (Automatic Gain Control). Set to ON (default) to have the
2
camera adjust the picture for low light conditions.
DC/AES Mode. Leave in ON position only.
3
LL (Line Lock). Set the camera synchronization to internal or
4
line lock (line lock is only available with 24 VAC). The factory
default setting is ON.
Rev 1.00
Use the LEVEL screw (#1) to compensate for the iris
Use the V Phase Adjustment Pot (#2) to adjust the
8
Document 900.0510
05/06
Hide quick links:
Advertisement
Table of Contents
