Table of Contents
Advertisement
6.2.
About Default Setting
The data of Menu, Mode, Card and EEPROM setting, etc. is set to the default condition in factory.
6.2.1.
How to set the Default Setting
1. Turn the Power on and set the Mode Dial to [RECORDING MODE].
2. When pressing [MENU], [MANUAL] and [iA] for more than 3 seconds until the top screen of the Service Menu being
displayed.
3. Item [1] is selected with the [TOUCH SCREEN] icon.
4. [YES] is selected with the [TOUCH SCREEN] icon.
5. After few seconds "END" is displayed on LCD monitor. Cutting of battery connection or AC power supply connection as a
completion of the "FACTORY SETTINGS."
The Default Settings clean up and/or refresh the following settings.
1. Menu, Mode, Adjusted Value
2. Card format
3. Reset of picture files and directory number (Set the picture record file number to 1)
4. Clear the information of Mechanism Lock
5. Set the time setting to no-setting
The Setting position of Default Settings:
Name
Mode dial
Setting Position
OFF
27
Advertisement
Chapters
Table of Contents
