Table of Contents
Advertisement
• If you see a blank [New Account] form, proceed to
the next step.
• If you see a list of blog accounts, you can
choose an account you want to finish
configuring, or choose [New Account] to set up a
new account. Then, proceed to the next step.
2
Enter the following details (if you do not know this
information, contact the blog site). The Name and
Upload To are required:
Name: Whatever you want to name the account
(such as MyBlog).
Upload To: The short code phone number or e-mail
address for posting (such as go@blog.com or
youruserID@blog.com)
URL: The blog site's URL (such as www.blog.com),
which can appear in your post notifications
48
e-mail & messages
Notify To: You can notify someone from your
phonebook when you post to the blog, if
Send Notification is on.
Title: The title that your phone uses for your posts
when Auto Blog is on.
3
Press Done to save the blog account details.
Tip: To help make your posts quicker,
s
É
press
>
Tools > Blog Central > Blog Setup. Then, turn
on Send Notification to notify the people in your Notify To list
whenever you post to this blog account, or turn on
Auto Blog to always post to one blog account (rather than
choosing a blog account each time you post).
post to a blog
After you set up a blog site, you can post to it.
Shortcut: After you capture a picture or video, you can
press Options > Post to Blog to post it quickly.
Find it: s
É
>
Tools > Blog Central > New Blog Message
Advertisement
Table of Contents
