Operating HomeLink
Press the appropriate HomeLink
should turn on.
The HomeLink
signal for up to 20 seconds as long as the button is pressed.
Reprogramming a HomeLink
Press and hold the desired HomeLink
HomeLink
ing and holding the HomeLink
transmitter until the HomeLink
rapid flash.
Erasing the entire HomeLink
Press and hold the 2 outside buttons
for 10 seconds until the indicator
light flashes.
If you sell your vehicle, be sure to
erase the programs stored in the
HomeLink
LS460/LS460L_U (OM50G04U)
®
compatible transceiver in your vehicle continues to send a
®
indicator light will start flashing slowly. Next, while still press-
button, press and hold the button on the
indicator light changes from a slow to a
®
memory.
5-6. Other interior features
button. The HomeLink
button
button. After 20 seconds, the
memory (all three programs)
419
indicator light
5