164
3-3. Adjusting the seats
Recall procedure
■
Check that the shift lever is in P.
1
Turn the engine switch to IGNITION ON mode.
2
Press one of the switches for
3
the driving position you want
to recall until the buzzer
sounds.
When you want to stop the position recall operation part-way through
■
Perform any of the following operations:
Press the "SET" switch.
●
Press switch "1", "2" or "3".
●
Operate any of the seat adjustment switches (only cancels seat position recall).
●
Operate the tilt and telescopic steering control switch (only cancels steering wheel
●
position recall).
Operate the seat belt shoulder anchor height adjusting switch (only cancels height
●
of seat belt shoulder anchor recall).
Front passenger's seat position recall limitations (vehicles with relaxation seat)
■
When retractable table (4-seat models) or ottoman is used, rearward memories
cannot be recalled.
Operating the driving position memory after turning the engine switch off
■
Driver's seat:
Recorded driving positions (except the steering wheel position) can be recalled up
to 180 seconds after the driver's door is opened and up to 60 seconds after it is
closed again.
Front passenger's seat:
Recorded seat positions can be recalled up to 180 seconds after the front passen-
ger's door is opened.
In order to correctly use the driving position memory function
■
If a seat position is already in the furthest possible position and the seat is operated in
the same direction, the recorded position may be slightly different when it is recalled.
LS460/LS460L_U (OM50G04U)