Panasonic DMP-B100P Service Manual page 35

4. Select "Utility".
5. Select "COM Setup".
6. Select "COM1", and select "OK".
7. Select "Spec Setup".
8. Select the new soft ware, and select "OK".
(Make it to the latest software selecting "NEW".)
9. Select "Exit".
10. Select "Adjustment".
11. Insert the SD DIAG Card.
12. Turn on the switch of serial cable (RFKZ0139), and select
"OK".
13. Connect the AC power supply code with the power supply
outlet, and select "OK".
14. The last repair date is displayed.
Confirm and select "OK".
35