Panasonic DMP-B100P Service Manual page 21

Error Code Diagnosis contents
F99 Hang-up
UNSUP- Unsupported disc error
PORT
No Read Disc read error
Hard Error Drive error
Self Check Restoration operation
Unformat Unformatted disc error
Description
Displayed when communication error has occurred
between Main microprocessor and Timer microprocessor.
This error is displayed when the following are detected.
1. When the unsupported format disc is reproduced.
2. When the unsupported format data is saved in the
supported format disc.
3. When it becomes impossible to read because the
quality of the disc is bad.
This error is displayed when the following are detected.
1.When the disc is dirty or damaged.
2. When falling in reading the reack information.
3. When the drive error occurs.
This error is displayed when the drive detected a hard
error.
This error is displayed when the restoration is operating
because it is power failures or turns off power during a
operation. If there is no problem, the display disappears
automatically. If a display does not disappear, there is the
possibility that defective Main P.C.B. / Drive unit.
This error is displayed when the unformatted DVD-RAM/
DVD-RW or the DVD-RW recorded by another make of
recorder is inserted.
21
LCD Display
"F99" is displayed utill the [Power]
key is pressed.
"This disc is incompatible."
Display for 5 seconds.
"Cannot read, please check the
disc."
Display for 5 seconds.
"DVD drive error."
Display for 5 seconds.
This disc is not formatted properly.
Format the disc in DISC
MANAGEMENT?