Removal Of Needle Plate Supporter Shaft B - Brother NV-10A Service Manual

Modules
12

Removal of Needle plate supporter shaft B

1. Remove the hook 2 of the feed arm supporter 1.
2. Remove the nut 1 M3 3.
3. Remove the needle plate supporter shaft B 4 from the base plate assy.
4. Remove the feed arm supporter 1 from the needle plate supporter shaft B
4.
13
Removal of Shaft supporter
1. Remove the 2 screws 1, and then remove the shaft supporter 1 from the
base plate assy.
14
Removal of Feed supporting plate
1. Remove the screw 1, and then remove the feed supporting plate B 1 and
the feed supporting plate 2 from the feed arm assy. 3.
2 - 50
Feed and bobbin module
3 2
4
1
1
1
2 3
1
1