Bosch BGL3A330GB Instruction Manual page 14

Changing the filter
18 a
18 c
24h
14
b
d
Cleaning the motor protection filter
The motor protection filter should be cleaned regularly
by knocking out the dirt and rinsing.
18
Figure
Open the dust bag compartment lid. Figure
a)Release the motor protection filter from the catch by
pulling it sideways, and pull it out in the direction of
the arrow.
b)Clean the motor protection filter by tapping out the dirt.
c) If it is very dirty, the motor protection filter should be
rinsed.
● The filter must then be left to dry for at least 24 hours.
d)After cleaning, refit the motor protection filter into the
appliance, lock it in place and close the dust bag
compartment lid.
16