Philips LX3000 Read This First Manual page 11

Back of TV
(example only)
3
Connect the DVD Receiver's Pr/Cr Pb/Cb Y COMPONENT
1
VIDEO OUT jacks to the matching Pr/Cr Pb/Cb Y VIDEO IN jacks
on the TV. You will need a component video cable (Green-Y; Blue-
Pb/Cb; Red- Pr/Cr) (not supplied). Match the cable colors to the
jack colors.
To hear TV channels through the DVD Home Cinema System,
2
connect the supplied red and white audio cables to the
DVD Receiver's red/white, right/left (TV) AUDIO IN jacks
and to the TV'S right/left AUDIO OUT jacks. Match the cable
colors to the jack colors.
Connect the power cords of the DVD Receiver and TV to a
3
power outlet.
Turn on the TV and set it to the correct Component Video
4
In channel. Go to the lowest TV channel and change channels
down until you find the Component Video In channel. (It is not
channel 3 or 4 as it might be when using a VCR.)
owner's manual for details.
Press STANDBY-ON y y on the front of the DVD Receiver to
5
turn on the DVD Receiver. The red Standby light will disappear.
Set VIDEO OUT to PR PB Y.
6
TV SHAPE
TV SYSTEM
VIDEO OUT
SCR SAVER
PR PB Y
Connecting to a TV with
Component Video In Jacks
Red & White
Audio Cable
2
COMPONENT
PrCr PbCb Y
VIDEO OUT
P-SCAN
AM
CENTER
AUDIO OU OFF ON S-VIDEO
LINE OUT AUDIO IN
OUT
DIGITAL OUT
R
AM/FM
WOOPER
ANTENNA AUX OPTICAL
LINE OUT
Rear of DVD Receiver
See your TV
Details are on page 28.
S-VIDEO
PR PB Y/SCART
Hookups - TV (cont'd) 11
1
3-Plug Component Video Cable
FR SR
+
VIDEO
OUT
-
4
SPEAKER SPEAKER
COAXIAL
+
-
3 CLASS 1
LASER PRODUCT
Helpful Hint
• On the TV, the Component
Video In jacks may be labeled
YUV or Pr/Cr Pb/Cb Y and may
be red, blue, and green.