Power Does Not Turn On / Power Is Turned Off - Marantz NR1508 Owner's Manual

Contents Connections

Power does not turn on / Power is turned off

Power does not turn on.
Check whether the power plug is correctly inserted into the power outlet. (v p. 48)
0
Power automatically turns off.
The sleep timer is set. Turn on the power again. (v p. 106)
0
"Auto Standby" is set. "Auto Standby" is triggered when there is no operation for a set amount of time. To disable "Auto Standby", set "Auto Standby" on
0
the menu to "Off". (v p. 167)
Power turns off and the power indicator flashes in red approx. every 2 seconds.
The protection circuit has been activated due to a rise in temperature within this unit. Turn the power off, wait about an hour until this unit cools down
0
sufficiently, and then turn the power on again. (v p. 217)
Please re-install this unit in a place having good ventilation.
0
Power turns off and the power indicator flashes in red approx. every 0.5 seconds.
Check the speaker connections. The protection circuit may have been activated because speaker cable core wires came in contact with each other or a
0
core wire was disconnected from the connector and came in contact with the rear panel of this unit. After unplugging the power cord, take corrective
action such as firmly re-twisting the core wire or taking care of the connector, and then reconnect the wire. (v p. 29)
Turn down the volume and turn on the power again. (v p. 50)
0
This unit's amplifier circuit has failed. Unplug the power cord and contact our customer service center.
0
The power to this unit does not turn off when you press the Power operation button. "HEOS On" appears on the display.
A HEOS device on the same network is playing an input source from this unit. Stop playback on the HEOS device when turning this unit off (setting it to
0
standby). The power of this unit will turn off automatically after around 20 minutes.
Front panel Display
Playback Settings
179
Rear panel
Tips
Remote Index
Appendix