Marantz NR1508 Owner's Manual page 148

Contents Connections
9
Move the Sound calibration microphone to position 2,
select "Continue", then press ENTER.
The measurement of the second position starts.
Measurements can be made in up to six positions.
Audyssey Setup
Place the microphone ear level at the 2nd
listening position, which should be no more
than 2ft (60cm) away from the 1st position,
then select
"Continue"...
Ear Height
Back
n Stopping Audyssey
A Press BACK to display the popup screen.
B Press o to select "Yes", then press ENTER.
Front panel Display
Playback
Continue
Setup
®
Rear panel
Settings
10
Repeat step 9, measuring positions 3 to 6.
0 To skip measuring the fourth and subsequent listening position, press o to
select "Complete" and press ENTER to proceed to step 12.
11
Select "Continue", then press ENTER.
Audyssey Setup
Measurements Complete.
Select "Continue" to analyze the data...
Repeat Last Test
Start the analysis and storage of the measurement results.
Analysis takes several minutes to complete.
0
The more speakers and measurement positions that there are,
the more time it takes to perform the analysis.
NOTE
0 When the measurement results are being saved, make sure the power is
not turned off.
148
Remote
Tips Appendix
Continue
Index