Connecting Speakers - Yamaha CRX-E320 Owner's Manual

Follow the procedure below to connect your speakers to this unit. The connection example below uses the Yamaha NX-
E700 (consisting of two speakers) and its supplied cables. For information on your speakers, refer to the owner's manual
supplied with your speakers.
CAUTION
Do not connect the power cable of this unit until all cable connections are completed.
Notes
• Be sure to connect the left channel (L), right channel (R), "+" (red) and "–" (black) properly. If the connections are faulty, no sound is
heard from the speakers. If the polarity of the speaker connections is incorrect, the sound can be unnatural and lacks bass.
• Do not let the bare speaker wires touch each other or do not let them touch any metal part of this unit. This could damage this unit
and/or your speakers.
• Use speakers with the specified impedance shown on the rear panel of this unit.
Right speaker
Speaker cables
L
R

Connecting speakers

Left speaker
SPEAKERS DIGITAL
OPTICAL
SUB WOOFER
OUT
OUT
MAINS
AUX TUNER
FM ANT
75Ω UNBAL.
IN OUT GND
L
R
CONNECTING SPEAKERS
AM
ANT
9
En