Connection Using An Dp Cable - Samsung OH46F User Manual

Connection Using an DP Cable

– OMF, OMF-K models are only supported.
– The appearance may differ depending on the product.
– Connecting parts may differ in different products.
DP IN
• Precautions for using DP
– To increase the standby power capacity, the product stops DP communication when it is turned off or in
power-saving mode.
If the product in dual monitor mode is turned off or goes into power-saving mode, monitor setting
changes may not be updated. As a result, screen output may not be displayed properly.
In the occurrence of this issue, set Max. Power Saving
– Some graphics cards that are not compliant with the DP standard may prevent the Windows Booting/
Bios screen from being displayed when the product is in power-saving mode. If this is the case, make
sure to turn on the product first before turning on your PC.
– The DisplayPort interface (DP IN) on the product and the provided DP cable are designed based on
the VESA standards. Using a DP cable that is not VESA compliant may cause the product to function
improperly. Samsung Electronics shall not be held responsible for any issues from using a cable that is
not VESA compliant.
Make sure to use a DP cable that is VESA compliant.
to Off before using the product.
37