Samsung OH46F User Manual page 125

Preventing afterimage burn-in
– The best way to protect the product from afterimage burn-in is switching the power off or setting the PC or
system to run a screen saver when not in use. Also, Warranty service may be limited depending on instruction
guide.
• Powering Off, Screen Saver and Power Saving Mode
– Power off the product for 2 hours after using it for 12 hours.
– Go to Display Properties > Power Supply on your PC and set the product to power off as required.
– Using a screen saver is recommended.
It is best to use a single-colour or moving-image screen saver.
• Regular colour Change
– Use 2 colours
Switch between 2 colours every 30 minutes as shown above.
Type 1
FLIGHT TIME
OZ348 20:30
UA102 21:10
• Avoid combinations of a text colour and background colour of contrasting brightness.
(Brightness: refers to the lightness or darkness of a colour which varies depending on the amount of
light emitted.)
– Avoid using grey as it may contribute to afterimage burn-in.
– Avoid using colours of contrasting brightness (black and white; grey).
:
FLIGHT TIME
:
OZ348 20:30
Type 2
FLIGHT TIME
OZ348 20:30
UA102 21:10
:
FLIGHT TIME
:
OZ348 20:30
• Regular Text colour Change
– Use bright colours of similar brightness.
Interval: Change text colour and background colour every 30 minutes
:
FLIGHT TIME
:
OZ348 20:30
:
FLIGHT TIME
:
OZ348 20:30
– Move and change text every 30 minutes as shown below.
:
FLIGHT TIME
:
OZ348
20:30
[ Step 1 ]
– Regularly display a moving image along with a logo.
Interval: Display a moving image along with a logo for 60 seconds after using for 4 hours.
:
FLIGHT TIME
:
OZ348 20:30
:
FLIGHT TIME
:
OZ348 20:30
[ Step 2 ]
:
FLIGHT TIME
:
OZ348 20:30
[ Step 3 ]
125