Emg Detail Information<2; Emg Detail Information<3 - JVC HR-S6950EU Service Manual

www.freeservicemanuals.info
3– : Mechanism sensor information
[Common table of MN* and HD*]
Mechanism sensor information
Display
REC safety SW
0- Tab broken
1- Tab broken
2- Tab broken
3- Tab broken
4- Tab present
5- Tab present
6- Tab present
7- Tab present
8- Tab broken
9- Tab broken
A- Tab broken
B- Tab broken
C- Tab present
D- Tab present
E- Tab present
F- Tab present
Tab broken = 0
Tab present = 1
–4 : Mechanism mode position
[Common table of MN* and HD*]
Mechanism
Dis-
sensor
play
information
-0
-1 EJECT
-2 EJECT-EJECT1
-3 EJECT1
-4 EJECT1-EJECT2
-5 EJECT2
-6 EJECT2-ULSTOP
-7 ULSTOP
Even number
-8 ULSTOP-UPPER
(0, 2, 4, 6, 8,
-9 UPPER
A, C, E)
-A UPPER-ONSTOP
-B ONSTOP
-C PLAY-FWD/SS
-D FWD/SS
-E FWD/SS-REV
-F REV
-0 REV-OFFSTOP
-1 OFFSTOP
Odd number
-2 OFFSTOP-FFREWB Intermodal position
(1, 3, 5, 7, 9,
-3 FFREWB
B, D, F)
-4 FFREWB-FFREW
-5 FFREW
1.3.6 EMG detail information <2>
The type of the cassette tape and the cassette tape winding posi-
tion can be confirmed based on the figure in EMG detail informa-
tion <2> .
[FDP/OSD display]
* 5 : * 6 : * 7
* 5 : Type of the cassette tape in use <1>
* 6 : Winding position of the cassette tape in use
* 7 : Type of the cassette tape in use <2> (Winding area)
Note:
• EMG detail information <2> is the reference information
stored using the remaining tape detection function of the cas-
sette tape. As a result, it may not identify cassette correctly
when a special cassette tape is used or when the tape has
variable thickness.
1-8
Mechansim
Start sensor End sensor
position sensor
ON ON
ON ON OFF
ON OFF
ON OFF
OFF
OFF ON
OFF ON OFF
OFF OFF
OFF OFF
OFF
ON ON
ON ON OFF
ON OFF
ON OFF
OFF
ON
OFF
OFF ON OFF
OFF
OFF
OFF OFF OFF
Sensor ON = 0 Sensor ON = 0
sensor OFF = 1 Sensor OFF = 1
Deck operation mode
Not established
EJECT position
Intermodal position
EJECT1 position
Intermodal position
EJECT2 position
Intermodal position
ULSTOP position
Intermodal position
Loading (unloading) tape
Intermodal position
PLAY position
Intermodal position
FWD (FWD Still/Slow) position
Intermodal position
REV (REV Still/Slow) position
Intermodal position
Pinch roller OFF position
FF/REW Brake position
Intermodal position
FF/REW position
Digitized in Heiloo Netherland
* 5 : Cassette tape type <1>
Display
00 Cassette type not identified
16 Large reel/small reel (T-0 to T-15/T-130 to T-210) not classified
82 Small reel, thick tape (T-120) identified/thin tape (T-140) identified
ON
84 Large reel (T-0 to T-60) identified
92 Small reel, thick tape (T-130) identified/thin tape (T-160 to T-210) identified
ON
93 Small reel, thick tape/C cassette (T-0 to T-100/C cassette) not classified
C3 Small reel, thick tape/C cassette (T-0 to T-100/C cassette) being classified
ON
D3 Small reel, thick tape/C cassette (T-0 to T-100/C cassette) being classified
E1 C cassette, thick tape (TC-10 to TC-20) identified
ON
E2 Small reel, thick tape (T-0 to T-100) identified
E9 C cassette, thin tape (TC-30 to TC-40) identified
ON
F1 C cassette, thick tape/thin tape (TC-10 to TC-40) not classified
ON
Notes:
• Cassette tape type
ON
sition and the identification count is variable depending on the cas-
ON
sette tape type. If an EMG occurs in the middle of identification, the
cassette tape type may not be able to be identified.
• If other value than those listed in the above table is displayed,
the cassette tape type is not identified.
* 6 : Cassette tape winding position
The cassette tape winding position at the moment of EMG is dis-
played by dividing the entire tape (from the beginning to the end) in
21 sections using a hex number from "00" to "14".
"00" : End of winding
"14" : Beginning of winding
"FF" : Tape position not identified
* 7 : Cassette tape type <2> (Winding area)
Display
Cassette tape type <2>
00 Cassette type not identified
04 - 08 C cassette, thick tape
05 - 06 Small reel, thick tape
05 - 0C C cassette, thick tape
06 - 0C C cassette, thin tape
06 - 0C C cassette, thin tape
07 - 08 Small reel, thick tape
09 - 0B Small reel, thick tape
0C - 0D Small reel, thick tape
0D - 0F Small reel, thick tape
0E - 10 Small reel, thick tape
10 - 12 Small reel, thin tape
10 - 13 Small reel, thick tape
11 - 14 Small reel, thick tape
12 - 14 Small reel, thin tape
13 - 14 Small reel, thin tape
13 - 14 Small reel, thin tape
13 - 14 Small reel, thin tape
13 - 14 Small reel, thick tape
15 - 16 Large reel
16 - 17 Large reel
17 - 18 Large reel
19 - 1B Large reel
Note:
• The values of cassette tape type <2> in the above table are
typical values with representative cassette tapes.
1.3.7 EMG detail information <3>
Three deck operation modes preceding the deck operation
mode in which the EMG occurs may be confirmed based on
the figures in the EMG information detail <3>. For the contents
of the displayed information, see the table "Deck operation
mode" in section "1.3.5 EMG detail information <1>".
Cassette tape type <1>
<1>
is identified a few times during mode tran-
(Reference) Word data
(Beginning)
TC-10 (0497 - 0506) (0732 - 0858)
T-20 (05A9 - 0661)
TC-20P (0599 - 05FF) (0AA1 - 0C07)
TC-40 (0623 - 063D) (0C41 - 0CC3)
TC-30 (0611 - 0638) (0C0C - 0CB2)
T-40 (07CC - 08E5)
T-60 (09FD - 0B78)
T-80(DF-160) (0C20 - 0DFC)
T-90(DF-180) (0D31 - 0F3E)
T-100 (0E43 - 107F)
T-140 (10E1 - 120C)
T-120(DF-240) (1073 - 1313)
T-130 (1185 - 1429)
T-160 (12D3 - 141F)
T-210(DF-420) (1373 - 14C3)
T-180(DF-360) (1357 - 14C0)
T-168 (1395 - 14EE)
DF-300 (13A8 - 14CE)
T-20 (1536 - 1618)
T-30 (1647 - 175A)
T-40 (1759 - 189C)
T-60 (1989 - 1B2F)
3/28/2017
(End)