Operation; Inspection And Maintenance - Central Machinery 47755 Owner's Manual & Safety Instructions

Operation

Read the ENTIRE RULES FOR SAFE
OPERATION section at the beginning
of this manual including all text
under subheadings therein before
set up or use of this product.
1. Pull the chain on the Motor (12) to turn on the fan
and cycle through low-medium-high-off settings.
2. To adjust the fan's angle:
a. Unplug the fan and allow it to stop.
b. Loosen the Bolt (11d) and the Angle Knob (10).

Inspection and Maintenance

Before appliance inspection or maintenance, make sure the appliance's switch is turned off, the cord is
unplugged, and the unit has cooled completely.
AUTOMATIC RESET SAFETY DEVICE IN MOTOR. TO REDUCE RISK OF
INJURY DISCONNECT POWER SUPPLY BEFORE SERVICING.
TO PREVENT SERIOUS INJURY FROM APPLIANCE FAILURE:
Do not use damaged appliances. If abnormal noise or vibration
occurs, have the problem corrected before further use.
1. BEFORE EACH USE, inspect condition of the Fan.
Check for loose screws, misalignment or binding
of moving parts, cracked or broken parts, and any
other condition that may affect its safe operation.
PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM
IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR
MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS
QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE
ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY
STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND
LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY
ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS
THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.
Page 6
TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION OR ELECTRIC
SHOCK:
For technical questions, please call 1-888-866-5797.
c. Adjust the fan's angle, then retighten
the Bolt and Angle Knob securely and
plug in the fan before further use.
3. To adjust the fan's height:
a. Unplug the fan and allow it to stop.
b. Loosen the Height Knob (8).
c. Adjust the Extension Pole (9)
to the desired height.
WARNING! Do not over-extend the
Extension Pole. Over-extension can
cause the pole assembly to fall apart.
d. Tighten the Height Knob securely and
plug in the fan before further use.
2. Clean regularly to prevent dust from accumulating
on Blade. Automatic reset safety device in
motor. To reduce risk of injury disconnect
power supply before servicing. Use damp
cloth during cleaning and dry before use.
Item 47755