Table of Contents
Advertisement
Quick Links
Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2008 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
Email our technical support at: productsupport@harborfreight.com
Visit our website at: http://www.harborfreight.com
Email our technical support at: productsupport@harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
17f
Advertisement
Table of Contents
Related Manuals for Central Machinery 47755
Summary of Contents for Central Machinery 47755
- Page 1 Owner’s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.
-
Page 2: Safety Symbols
It must be understood by operator that common sense and caution are factors which cannot be built into this product, but must be supplied by operator. Page 2 For technical questions, please call 1-888-866-5797. Item 47755... - Page 3 Specifications Electrical Requirements 120 VAC / 60 Hz / 2.4 A Low: ~900 RPM Speeds Medium: ~1,030 RPM High: ~1,080 RPM HOUSEHOLD USE ONLY Item 47755 For technical questions, please call 1-888-866-5797. Page 3...
- Page 4 Angle Knob (10) onto the Carriage Bolt and tighten it firmly to secure the Motor (12) in place. Remove the Nuts and Washers (13a, 13b, & 13c) from the front of the Motor (12). Page 4 For technical questions, please call 1-888-866-5797. Item 47755...
- Page 5 Motor shaft with the Set Screw side first. Securely tighten the Set Screw (14) on the side of the Blade (16). Swing all hinged clips on the Front Grill (17) out. Item 47755 For technical questions, please call 1-888-866-5797. Page 5...
- Page 6 LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. Page 6 For technical questions, please call 1-888-866-5797. Item 47755...
- Page 7 Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Item 47755 For technical questions, please call 1-888-866-5797. Page 7...
- Page 8 Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.