MSI 890FXA-GD65 series User Manual page 26

Fan Power Connectors: CPUFAN, SYSFAN1~4
The fan power connectors support system cooling fan with +12V. When connecting the
wire to the connectors, always note that the red wire is the positive and should be con-
nected to the +12V; the black wire is Ground and should be connected to GND. If the
mainboard has a System Hardware Monitor chipset on-board, you must use a specially
designed fan with speed sensor to take advantage of the CPU fan control.
CPUFAN
Important
Please refer to the recommended CPU fans at processor's official website or consult
•
the vendors for proper CPU cooling fan.
• CPUFAN supports fan control. You can install Control Center utility that will automati-
cally control the CPU fan speed according to the actual CPU temperature.
• Fan cooler set with 3 or 4 pins power connector are both available for CPUFAN.
Front Panel Audio Connector: JAUD1
This connector allows you to connect the front panel audio and is compliant with Intel
Front Panel I/O Connectivity Design Guide.
SYSFAN1~4
®
En-15