Set Lists - Korg kronos Operation Manual

Is the MIDI Clock (Global P1: MIDI) set to Internal or
Auto?
EXi programs don't play correctly in a
Song.
Does the Track's number have a gray background color,
instead of blue? And, does [Inactive] appear after the
Program name in the Selected Track Info?
• The Programs in the Song are asking for more than the
maximum available EXi fixed resources. Remove one or
more of the EXi Programs which uses fixed resources.
For more information, see "CX-3 & other EXi:
Limitations on EXi fixed resources" on page 424 of the
Parameter Guide.
KARMA doesn't record properly after
using "Copy From Combi"
Is Multi REC (Sequencer P0: Play/REC) checked?
Are the settings in the Copy From Combination dialog box
correct?
• In the Copy From Combination dialog box, check the
Multi REC standby option before you execute the copy.
This will cause the settings to be adjusted automatically.
Can't record your performance using
Tone Adjust
Changes you make using Tone Adjust are recorded as system
exclusive data. Did you check the Global mode MIDI Filter
Enable Exclusive check box?
RPPR does not start
Is the Sequencer P0: Play/REC RPPR setting checked? (See
"Using RPPR (Realtime Pattern Play/Record)" on
page 112.)
Are Assign, Pattern Select, and Track set correctly? See
"Using RPPR (Realtime Pattern Play/Record)" on page 112.
Is the MIDI Clock (Global P1: MIDI) parameter set to
Internal, Auto MIDI, or Auto USB? See "MIDI Clock
(MIDI Clock Source)" on page 773 of the Parameter Guide.

Set Lists

COMPARE doesn't affect Control Surface
When you're in Set List mode, the COMPARE button acts
on edits to the Set List, such as the sounds selected for each
Slot, hold times, comments, and so on.
Control Surface edits in Set List mode apply to the Slot's
Program, Combination, or Song, and not to the Set List
itself. This means that pressing COMPARE in Set List mode
will not revert such edits.
To revert Control Surface edits made in Set List mode:
1. Go to the sound's native mode.
For instance, if the Slot contains a Program, go to Program
mode.
Troubleshooting Set Lists
Can't record on an audio track
Have you unchecked the Memory Protect Internal HDD
Save check box (Global P0)?
Have you set Track Select to the audio track you want to
record?
If you want to perform multi-track recording (Multi REC
checked), is Play/Rec/Mute set to REC?
Are the audio input settings correct?
• Please see Audio input and output, and Audio inputs
don't work properly.
Is there space remaining on the disk?
• Delete unwanted WAVE files.
• Save a copy of important WAVE files on external media,
and then delete them from the disk.
Are the REC Source settings correct?
A "File already exists" message appears, and you can't
record.
• In the P0: Play/REC– Preference page, change the name
of the WAVE file that you're going to record.
• Delete the files in the TEMP folder.
Can't import WAVE files into a region of
an audio track
In the Import Region/WAVE dialog box, you selected a
WAVE file but can't press the OK button.
• Only 44.1 kHz and 48 kHz WAVE files can be imported.
• You can only directly import WAVE files from the
internal disk. To use files from CDs or external USB
devices, you must first copy them to the internal disk,
and then import the copied file into the Song.
Noise in sampled audio
If you use COMPARE or change the EXi Instrument type in
an EXi Program while recording a sample, this can cause a
glitch in the resulting sample.
2. Press COMPARE.
The Control Surface edits will be reverted. You can then
return to Set List mode if desired.
263