P3100 & P3200 Series
Users Manual
9. Remove three screws from reservoir spacers that hold the assembly to the top plate.
10. The reservoir body (11) and reservoir cap (5) are a close fit to the reservoir tube (7),
11. The valve vent (9) is disassembled from the reservoir body by removing the three
12. Reassembly is the reverse of the above procedure.
6-16
The assembly can now be withdrawn from the underside of the top plate.
and both rely on the O-ring seal (6) to hold them in place. These parts can be
separated by gently pulling them apart.
screws (8).