Philips HC8850 User Manual page 10

XP SBC HC 8850/00-1
Distorted sound
Maintenance
Hearing Safety! Continuous use at a high volume may permanently
damage your hearing.
10
19-03-2002 14:45
– Check the volume on audio source/ headphone is not
set at too high a level. Reduce the volume.
– Distance from the transmitter is too large. Move closer
to the transmitter.
– Interference from fluorescent lamps/ other radio
sources. Move transmitter or headphone elsewhere/
change the transmitter's channel.
– Make use of the HC8852 transmitter. Some
transmitters already built into other equipment may not
be compatible with the HC8855 headphone because of
the advanced technologies used in the HC8855
headphone.
– The SRS™ surround sound mode works best on
normal stereo signals. Make sure that the surround
modes on the audio source are switched off when
listening to the HC8855 headphone.
– If the headphone will not be used for a long time,
please remove the batteries to prevent leakage and
corrosion.
– Only replace the batteries with R03/AAA NiMH
batteries (preferably Philips).
– Do not leave the headphone near heat sources. Do
not expose to direct sunlight, excessive dust, moisture,
rain or any kind of mechanical shock.
– Do not use alcohol, thinner or petroleum-based
substances to clean the headphone or transmitter. Use a
slightly dampened chamois cloth to clean the housing.
– Do not use cleaning agents containing alcohol, spirits,
ammonia or abrasives as these may harm the housing.
Pagina 10
Troubleshooting