Hamilton Beach FlexBrew Manual page 9

How to Set the Time for the First Time
1
Press and release T
IME button.
5
Minutes will flash for only 3
seconds and then stop flashing
if the T
IME button is not pressed
or held within that time. Press
T
button to adjust by 1-minute
IME
increments.
2
"12" will flash.
6
To adjust minutes faster, press
and hold T
IME button. Release
button and wait 3 seconds for
the clock to stop flashing and the
time will be set.
3
Press T
IME button to adjust by
1-hour increments.
NOTE: If you press the I/O (ON/
OFF) button before setting the
clock, the clock display will
disappear for your convenience.
At any time, the clock can be set
by pressing the T
button.
IME
4
To adjust hours faster, press
and hold T
IME button. Release
button and wait 3 seconds for
the minutes to begin flashing,
indicating minutes can now
be set.
9