Table of Contents
Advertisement
5 Watch TV
Note
•
Before you start, ensure that you have connected the antenna to the set.
•
Make sure you are in an area with sufficient signal coverage. You can check the signal
coverage with the TV broadcast authority of your country or visit www.support.
philips.com.
Turn on
Slide the POWERON/OFF switch to the ON position.
Switch to standby
1
To switch the unit to standby mode, press
seconds
•
To switch on the unit from standby mode, press
unit.
Switch channels
1
Press CH+/CH- or Number keys on the remote control.
•
You can also press
Adjust volume level
•
Press
/
•
Press
to mute/unmute sound.
View program information (DTV)
To view brief information of the current program, press
•
To exit the program information page, press
CH /
to increase/decrease the volume level.
on the main unit for 3
on the main unit to switch channels.
again.
on the main
.
EN
25
Advertisement
Table of Contents
