Using The Swivel Head - Philips QC5170 User Manual

 Set the comb attachment to the desired hair length. To do this,
press the release button on the length selector (1) and turn it to
the left or right (). (Fig. 6)
Do not turn the length selector beyond the highest hair length setting
(5).
 Switch on the appliance.

Using the swivel head

From its starting position of 0° (pointing forwards), you can turn
,
the swivel head 5° or 90° to the left or right. In this way, you can
adjust the position of the cutting element to the part of your head
you are clipping. This makes it much easier to clip your own
hair. (Fig. 7)
1 Set the cutting element to the desired position by turning the
swivel head ('click'). (Fig. )
Always adjust the position of the cutting element with the swivel head.
Do not turn the cutting element or the comb.
Do not turn the swivel head more than 90° to the left or right.
The swivel head allows you to hold and use the appliance like a
,
brush. (Fig. 9)
Tips
- We advise you to start clipping at the highest setting of the large
comb and to reduce the hair length setting gradually.
- If a lot of hair has accumulated in the comb attachment, remove it
from the clipper and blow and/or shake the hair out of it. When you
remove the comb attachment, the hair length setting does not
change.
- Write down the hair length settings you use to create a certain
hairstyle as a reminder for future clipping sessions.
1 Move the clipper through the hair slowly.
The hair on different parts of your head grows in different
,
directions. You may want to try different clipping directions
(upwards, downwards and across) (Fig. 10).
English
9