Section 3-Safety Inspection; Safety Inspection Checklist; Inspect Initially - Invacare A4 Owner's Manual

SECTION 3—SAFETY INSPECTION
SECTION 3—SAFETY INSPECTION
NOTE: Every six months, take your wheelchair to a qualified technician for a thorough inspection and servicing. Regular cleaning will reveal
loose or worn parts and enhance the smooth operation of your wheelchair. To operate properly and safely, your wheelchair MUST be cared for
just like any other vehicle. Routine maintenance will extend the life and efficiency of your wheelchair. Clean upholstery with mild soap and
water or spray disinfectant using a sponge. DO NOT use bleach or wash in a washing machine.

Safety Inspection Checklist

CAUTION
As with any vehicle, the wheels and tires should be checked periodically for cracks and wear, and
should be replaced if damaged.
Initial adjustments should be made to suit your personal body structure and preference. Thereafter follow these maintenance
procedures:

Inspect Initially

❑ Ensure wheelchair rolls straight (no excessive drag/pull to one side).
❑ Ensure wheel locks DO NOT interfere with tires when rolling.
❑ Ensure pivot points are free of wear and looseness.
❑ Ensure wheel locks are easy to engage and prevent the wheels from moving.
❑ Ensure that the casters are free of debris.
❑ Inspect seat and back upholstery for rips or sagging.
❑ Inspect upholstery fastening flaps to ensure they securely latch.
❑ Inspect seat positioning strap for any signs of wear. Ensure buckle latches. Verify hardware that attaches strap to frame is
secure and undamaged. Replace if necessary.
❑ Ensure hand grips (if equipped) are not loose.
❑ Ensure quick release axles and camber inserts are clean.
❑ Ensure camber bar mounting clamps are securely tightened.
❑ Ensure quick/quad release axles lock properly.
❑ Ensure no excessive side movement or binding when lifted and spun.
❑ Inspect handrims for signs of rough edges or peeling.
❑ Inspect spokes for bent or broken spokes.
❑ Ensure all spokes are uniformly tight.
❑ Clean upholstery and armrests.
❑ Inspect wheel/fork assembly for proper tension by spinning caster; caster should come to a gradual stop.
❑ Loosen/tighten locknut if wheel wobbles noticeably or binds to a stop.
❑ Ensure wheel bearings are clean and free of moisture.
❑ Inspect tires for flat spots and wear.
❑ If pneumatic tires check for proper inflation.
❑ Check that all labels are present and legible. Replace if necessary.
17
Part No 1110545 A4 Owner's Manual