Ncm S7 Industrial Ethernet; Scalance X-300/X-400 "Observer Function - Siemens SIMATIC PCS 7 Service Manual

Diagnostics in PCS 7
8.18 Diagnostic tools
Information on
Faults on PRO‐
FIBUS
Status of DP
slaves
8.18.3.2

NCM S7 Industrial Ethernet

Call
In the Siemens SIMATIC programs Start menu: STEP 7 > NCM S7 Industrial Ethernet >
Diagnostics
Overview
Information on
CP status
General CP diag‐
nostics and statis‐
tics functions
Diagnostics func‐
tions depending
on CP type and
operating mode
8.18.3.3

SCALANCE X-300/X-400 "Observer function"

Call
Called via Web Based Management or TELNET
116
Detailed information
Only when a diagnostic repeat‐
er is used
Display DP slaves in the net‐
work view
Detailed information
Dynamic information about
the operating mode of the
communication functions of
CPs connected online
Operating mode
Scan event messages recor‐
ded in the Ethernet CP
ISO transport connections
ISO-on-TCP connections
TCP connections
UDP connections
E-mail connections
Called via
PLC > PROFIBUS >
Display Network Topol‐
ogy
View > With DP Slaves
Called via Additional information
Diagnostics > Online > Online help for
Open Connection topic: "Hardware diagnos‐
tics"
Manual
NCM S7 for Industrial
Ethernet
Diagnostics > Online >
Open Connection
Diagnostics > Online >
Open Connection
Service Support and Diagnostics (V8.2)
Service Manual, 03/2016, A5E36200111-AA
Additional information
STEP 7 ,
SIMATIC NET;