Ncm S7 Industrial Ethernet - Siemens PCS 7 Service Manual

Diagnostics in PCS 7
7.18 Diagnostic tools
Overview
Topic
Consistency of
configuration
Connection
status
Connection
status
Faults on
PROFIBUS
Status of DP
slaves
7.18.3.2

NCM S7 Industrial Ethernet

Calling
In the Siemens SIMATIC programs Start menu: STEP 7 > NCM S7 Industrial Ethernet >
Diagnostics
Overview
Topic
CP status
General CP
diagnostics and
statistics
functions
Diagnostics
functions
depending on CP
type and
operating mode
98
Detailed information
Nodes that are not networked
(exception: MPI nodes that are
not networked) inconsistent
connections in subnets with
only one node
Established connections to
SIMATIC stations
Established connections to PC
stations
Only when a diagnostic
repeater is used
Display DP slaves in the
network view
Detailed information
Dynamic information about
the operating mode of the
communication functions of
CPs connected online
Operating mode
Scan event messages
recorded in the Ethernet CP
ISO transport connections
ISO-on-TCP connections
TCP connections
UDP connections
E-mail connections
Called with
Network > Check
Consistency
Select CPU: PLC >
Activate Connection
Status
Select PC stations: PLC
> Activate Connection
Status
CPU > PROFIBUS >
Display Network
Topology
View > With DP Slaves
Called with
Diagnostics > Online
> Open Connection
Diagnostics > Online
> Open Connection
Diagnostics > Online
> Open Connection
Service support and diagnostics (V8.0)
Service Manual, 03/2012, A5E02779775-02
Additional information
STEP 7
Online help for
"Checking the
consistency of the
network" topic
Additional information
STEP 7 ,
Online help for
topic: "Hardware
diagnostics"
SIMATIC NET;
Manual
NCM S7 for Industrial
Ethernet