USB
Chipset:
-
2 x USB 3.1 Gen 2 Type-A ports (red) on the back panel
-
2 x USB 3.1 Gen 1 ports (available through the internal USB header)
-
5 x USB 2.0/1.1 ports (1 port on the back panel, 4 ports available through
the internal USB headers)
CPU:
-
4 x USB 3.1 Gen 1 ports on the back panel
Internal
1 x 24-pin ATX main power connector
Connectors
1 x 8-pin ATX 12V power connector
1 x M.2 Socket 3 connector
6 x SATA 6Gb/s connectors
1 x CPU fan header
1 x water cooling CPU fan header
2 x system fan headers
1 x system fan/water cooling pump header
1 x front panel header
1 x front panel audio header
1 x S/PDIF Out header
1 x USB 3.1 Gen 1 header
2 x USB 2.0/1.1 headers
1 x Trusted Platform Module (TPM) header
1 x CPU cooler LED strip/RGB LED strip extension cable header
1 x RGB (RGBW) LED strip extension cable header
1 x Clear CMOS jumper
Back Panel
1 x PS/2 keyboard/mouse port
Connectors
1 x DVI-D port
1 x HDMI port
4 x USB 3.1 Gen 1 ports
2 x USB 3.1 Gen 2 Type-A ports (red)
1 x USB 2.0/1.1 port
1 x RJ-45 port
1 x optical S/PDIF Out connector
5 x audio jacks (Center/Subwoofer Speaker Out, Rear Speaker Out, Line In,
Line Out, Mic In)
I/O Controller
iTE
I/O Controller Chip
®
Hardware
Voltage detection
Monitor
Temperature detection
Fan speed detection
Overheating warning
Fan fail warning
Fan speed control
* W hether the fan (pump) speed control function is supported will depend on the fan
(pump) you install.
- 7 -