Sony Cybershot DCR-SR100 Service Manual page 22

Sheet attachment positions and procedures of processing the flexible boards/harnesses are shown.
THE METHOD OF ATTACHMENT OF FP-439 FLEXIBLE BOARD
Fold dotted line parts of the FP-439 flexible board
1
as shown in figure.
2 Put the FP-432 flexible board on the FP-439
flexible board.
Adhesive tape
Adhesive tape
Adhesive tape
3 Pass the FP-439 flexible board through
the FPC
4 Install the
FPC clamp(H)
DCR-SR90E/SR100/SR100E_L2
Fold
clamp(H).
FPC clamp(H)
FPC clamp(H) in the hinge assy.
Hinge assy
HELP
5 Roll the
FP-432
Switch
6 Put the adhesive sheet and FP-439 flexible
the FP-439 flexible board 1.5 times,
in the direction of arrow
A
board on the hinge assy according to the
position of the boss and insert the switch of
the FP-432 flexible board as shown in figure.
Boss
Switch
A .
Adhesive tape
HELP