Operation; Use Of The Remote Control - Philips FTR9952/69C User Manual

Select your external A/V sources
Press this key repeatedly to select
, ,
A/V2 A/V3 CVBS A/V3 RGB
, , , according to where you
A/V5 A/V6 VGA
connected your external source (see p. 25).
Remark: in mode only some keys are valid.
VGA
See
Menus and on screen information will disappear
M
Press this key repeatedly to indicate the
peripheral equipment you want to operate
with the remote control.
TV
Press this key to use the remote control
directly in the TV mode
b
Dual screen see p. 16
Press this key repeatedly to select another
picture format: 4:3, Movie Expand 14:9,
Movie Expand 16:9 with or without subtitling,
Super Wide,Wide Screen or Auto Format
(when Auto Format is set to Yes in the
Auto Format makes the picture to fill the
screen as much as possible.
Super Wide removes the black bars on the
side of 4:3 programs without causing
apparent distortion.
When in Movie Expand 14:9 or 16:9 display
format, you can make subtitles visible with
the cursor up/down.
Note: In VGA mode press the
between a 4:3, a 16:9 or a Wide VGA picture
In Dual screen mode press the
between a full or a squeezed picture format.
Bilingual choice and
sound mode selection
• to switch from
Stereo
case of stereo transmission, or from
to
Digital Sound Digital Sound Available
in case of digital transmission;
• to choose between language
language (Dual ), in case of bilingual
transmission.The setting is stored for each
TV channel separately.

Operation

Use of the remote control

Use of the remote control
,
A/V1
,
A/V4 (FRONT) ,
menu, p. 25.
VGA
if you select .
VGA
Mode selection
TV operation
Picture format
menu).
SETUP
key to switch
format.
key to switch
Press this key
to sound, in
Mono
,
(Dual ) or
TV
VCR 1 TUNER
VCR 2 TAPE
DVD SAT
M AMP CD
TV
b
OK
P
1 2 3
4 5 6
7 8 9
0
SMART CONTROLS
PICTURE SOUND
Use of the remote control
Standby
The set is switched off and the red indicator
lights up in front of receiver box and the
screen.
To switch the TV on again press the
or press - P + or the digit keys.
Although this set is provided with low power
standby it is still advised to switch off your TV
overnight instead of leaving it on standby.You
save energy.
Volume
Press + or - to adjust the volume.The
volume is adjusted. If you want to store the
volume adjustment in the memory, see the
Features menu, Sound PP store, p. 14 to
store the same volume adjustment for all
the stored TV channels.
P
Programme selection
To browse through the TV channels and A/V
sources activated in the Favourite
Programme menu.
Sound mute
Temporarily interrupt the sound or restore
it.
0/9
Digit keys
To select a TV channel.
For a two digit programme number, enter
the second digit within 2 seconds.
Previous programme
The previously selected TV channel or A/V
source is displayed.
Permanent programme number
Screen information
Press for 3 seconds to activate/de-activate
the continuous display of the programme
number.
Press briefly to display information about the
selected TV channel or A/V source, the
sound mode, picture format setting, the
selected DNR setting and the remaining time
set with the sleeptimer.
key
9