Install/Remove Antenna; Wrist Strap And Belt Clip; Customer - Cobra MR HH600W FLT GPS BT Owner's Manual

Intro Operation

Customer

Assistance

Install/Remove Antenna

Installation VHF Marine Radio Protocols
Customer
Installation
Install/Remove Antenna Assistance
Secondary Icons
1. To install the antenna turn the antenna into the radio
Antenna
clockwise to tighten . Do not overtighten .
2. To remove the antenna turn the antenna counterclockwise .
Main Icons
This radio transmitter IC: 906A-MRHH600 has been approved
Notice Caution
by Industry Canada to operate with the supplied antenna . Other
antennas are strictly prohibited for use with this device .
Cet émetteur radio IC: 906A-MRHH600 a été approuvé par
Industrie Canada pour fonctionner avec l'antenne fournie .
Intro Operation Customer Warranty
Assistance
D'autres antennes sont strictement interdits pour une utilisation
avec cet appareil .
Batteries and Charger
Customer
Installation
Assistance The radio is shipped with a sealed lithium-ion (LiON) battery pack
(P/N CM 110-034) that is rechargeable .
Secondary Icons
LiON Battery Pack
WARNING
The charger provided for this radio is only to be used
to charge the battery pack provided . Do not charge any
Notice Caution Warning
other type of batteries in the charger as fire, explosion
or battery damage may occur . Avoiding extreme
temperatures will also help prolong the life of the battery
pack for the radio . The device operating voltage is DC
6 .29V - DC 8 .40V .
Install Battery Pack
When your rechargeable batteries begin to discharge too quickly,
it is time to install a new battery pack . Your radio
will also operate with five (5) high-quality AA alkaline batteries,
using the included alkaline battery tray .
Installing the Battery Pack
1. Position the battery pack over the back of the radio .
2. Engage the battery pack into the radio until battery pack is
Tighten Screw
fully seated into the radio housing .
3. Tighten the screws using a coin or flat object to secure the
battery pack to the radio . Do not overtighten .
English
8
MRHH600_ENG_MANL.indd 8-9
Warranty
Warning
Intro Operation
Installation VHF Marine Radio Protocols
Installation

Wrist Strap and Belt Clip

•
Secondary Icons
Belt Clip
Notice
Insert Belt Clip onto Radio
•
Wrist Strap Attachment
Secure Radio
MARINE HH600 DSC+ GPS
16
USA 6W
TIME:10:00 LOC
DATE:06/30 A
32 49.800N EMERGENCY
999.11.077W
SOG: 3.7 KTS COG: 015 M
MENU WX CALL MORE
MOB
SQL 16+
Customer Warranty
Assistance
Wrist Strap and Belt Clip
Customer
Assistance
Use the spring-loaded belt clip to carry the radio on your person .
1. Slide the belt clip into the guide channel on the back of the
radio until it is locked in place .
2. To attach the wrist strap, insert it through the hole at the top
Caution Warning
of the belt clip, feed it through the looped end and pull tight to
secure to the belt clip .
3. Press open the belt clip, slide it over the belt and release the
clip .
4. To remove the belt clip from the radio press the tab on the belt
clip, which unlocks the clip, and slide it out .
Nothing Comes Close to a Cobra
•
9
®
4/3/17 5:03 PM